Electrical output of a photogalvanic cell utilised to perform solar power conversion and storage by with a lauryl glucoside, triazine and d-fructose system

Authors

  • Sushil Kumar Yadav Dr. Sushil Yadav, Department of Chemistry, Govt Dungar College, Bikaner (Raj.) India-334001

Keywords:

Renewable energy, Photocurrent, Photo potential, Fill factor, Conversion Efficiency

Abstract

Objective: The current work focuses on the role of surfactant in photogalvanic cells and how photons from sunshine can be exploited as a driving factor for energy conversion and storage.

Methods: An H-shaped pg unit was created to investigate electrical output in solar changes. Dye, reductant, surfactant, NaOH, double distilled water (DDW), multi-meter, calomel electrode, 250 k roistered, saturated calomel electrode, platinum electrode, carbon pot, resistance key, digital pH meter, microammeter, and 200 W tungsten bulb were used in the suggested electrical circuit. The proposed solar cell's reaction mechanism for generating photocurrent and photocurrent has been thoroughly investigated. For the sunlight-powered transition system, PG Cells were investigated.

Findings: Photocurrent, photo potential, efficiency of conversion, fill factor, and cell performance were all examined in PG cells. The values mentioned above are as follows: 388.0 A, 1141.0 mV, 0.7995%, 0.5389, and 129.0 minutes were measured. The cell's electrical output has also been seen for tetrazine, D-Fructose, and lauryl glucoside systems. Potential at power point, open circuit potential, power point of cell (pp), and current at short circuit were also investigated. The values obtained are as follows: 1133 mV, 1523 mV, 435.321, and 544A are the values.

Novelty: There seems to have a lot of study done on photogalvanics, but no one has concentrated on green dye-based work for a more sustainable future.   As a result, an actual research work plan for comprehensive investigation in the field of photogalvanic devices for solar energy transformation was developed. The photo galvanic is an expanding area of research, and the manuscript contains significant electrical output, conversion efficiency, and storage capacity of developed photogalvanic cells, with particular focus on to better performance (t1/2) and decreasing the expense of the photogalvanic cell to enhance business viability

Downloads

Published

2023-10-29

How to Cite

Yadav, S. K. (2023). Electrical output of a photogalvanic cell utilised to perform solar power conversion and storage by with a lauryl glucoside, triazine and d-fructose system . Chemical Synthesis Letters, 1(01), 25–31. Retrieved from https://csl.thecmrs.in/index.php/j/article/view/14

Issue

Section

Articles

Categories